Controller "ENTTEC DMXIS" not recognized by QLC +

The issues found when using the Input/Output Manager panel
lajous

Controller "ENTTEC DMXIS" not recognized by QLC +

Post by lajous » Mon Oct 13, 2014 6:37 pm

"QLC" supports very well the " ENTTEC DMXIS " controller.
It is not the case for " QLC + ". The East it foreseen an evolution of QLC +?
Thank you

Massimo Callegari

Controller "ENTTEC DMXIS" not recognized by QLC +

Post by Massimo Callegari » Mon Oct 13, 2014 6:48 pm

Hello to you.
Which operating system are you using ?
Which version of QLC+ are you using ?
Is the device listed in the input/output panel or not ?

lajous

Controller "ENTTEC DMXIS" not recognized by QLC +

Post by lajous » Fri Oct 31, 2014 7:11 pm

Hello,
OSX 10.6.8
QLC+ version 4.8.1
The device "dmxis" is not listed in the imput:Output
With QLC it's ok, "dmxis" is listed
thank you so much

lajous

Controller "ENTTEC DMXIS" not recognized by QLC +

Post by lajous » Mon Nov 17, 2014 5:20 pm

no reply?

Massimo Callegari

Controller "ENTTEC DMXIS" not recognized by QLC +

Post by Massimo Callegari » Mon Nov 17, 2014 6:14 pm

Can you try on a different machine ?
I'm afraid OSX 10.6.8 is getting a bit too old now

lajous

Controller "ENTTEC DMXIS" not recognized by QLC +

Post by lajous » Thu Nov 20, 2014 5:54 pm

This old version of my MacBookPro has the merit to be very stable, and I meet no problem in particular with logic pro, also I hesitate has to change because what I read on the forums do not encourage. I believe that I am not the only one to think of it. "DMXIS" and " Buddy Show " works also very well also with my old version.
It's a pity for QL +!
Thank you very much to have answered.
Jacques

ncoustaury
Posts: 1
Joined: Tue Jun 16, 2015 4:14 pm
Real Name: Nicolas

Re: Controller

Post by ncoustaury » Tue Jun 16, 2015 4:19 pm

Hello,

I am up to date OS X 10.10.3 and DMXIS isn't recognized.

Can you help me ?

Thank you !

Nicolas

User avatar
mcallegari
Posts: 1998
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Re: Controller

Post by mcallegari » Wed Jun 17, 2015 10:42 am

Apparently the DMXIS is a FTDI based device, so it should definitely work with QLC+.

I think the issue here is a combination of Apple drivers and VCP drivers.
Please have a look at these:

http://www.enttec.com/support-center/kb ... _IMPORTANT
http://www.dmxis.com/macdriverfix/
http://www.enttec.com/support-center/kb/article/51

filipek.o
Posts: 40
Joined: Thu Nov 19, 2015 12:52 pm
Real Name: Filip

Re: Controller

Post by filipek.o » Fri Dec 04, 2015 11:20 pm

Hey did You manage to solve it? I'm using dmxis but thru midiout and it is working but not awesome, so I will really appreciate possibility of having dmxis running straight from qlc+
Thank you!

User avatar
mcallegari
Posts: 1998
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Re: Controller

Post by mcallegari » Sat Dec 05, 2015 8:22 am

OK, can anyone please provide the USB VID/PID of the DMXIS ?
It has to work, and probably there is something silly going on here

[EDIT] Nevermind. Found them. It's 0x0403 / 0x6001 like every other Enttec product, so again, it should work out of the box.
Again, which operating system are you using ? Which QLC+ version ?

Post Reply