Problem with uDMX Device

The issues found when using the Input/Output Manager panel
Post Reply
GreenKite
Posts: 2
Joined: Thu Sep 28, 2017 7:23 am
Real Name:

Hello,

I have an uDMX Device that worked great with Mac OS Sierra but since i updated to Mac OS High Sierra it just works for a few seconds.
I already tried all suggested solutions I got from Google and from this Forum even reinstalling QLC+.

When I plug it into my USB Port and then start QLC+ the Status LED turns from red to green and I can control my Lightings.
After a few seconds the LED turns red again and I'm not able to control anything.

If I disable the uDMX output then rescan for devices and then turn on the uDMX output again it works again for a few seconds.

As said it worked fine until I updated my OS.


Alex
Ehrack
Posts: 6
Joined: Sun Dec 24, 2017 8:15 pm
Real Name: Connor Ehrgood

I have the same issue. Did you ever get it working?
GreenKite
Posts: 2
Joined: Thu Sep 28, 2017 7:23 am
Real Name:

Never got it working.
In the end I returned the uDMX Device and bought an Enttec openDMX that works great.
Post Reply