Simple Desk channel display issue

The issues found when using the Simple Desk panel
Post Reply
hkbeat
Posts: 2
Joined: Thu Dec 29, 2016 3:03 pm
Real Name: Ken Davey

I've found that switching from full channel view to fixture channel view in Simple Desk, makes some channels disappear. These channels are also not shown in either view setting under the Function Manager. This happens with three fixtures I have - Martin Rush Wizard, Martin Wizard Extreme, and an ADJ Ultra Hex Bar 6.

The missing channels are -

Rush Wizard 6 and 7 [mirror drum swivel (pan) and reflector rotation (tilt)]
Wizard Extreme 7 and 8 [mirror drum swivel (pan) and mirror drum rotation (tilt)]
Ultra Hex Bar 10 and 11 [auto programs and program speed/sound sensitivity]

The channels are shown in the fixture definition and channel fade configuration windows for each fixture.

Is this a known issue, or are they excluded for some reason?

Here are 'before' and 'after' screen shots to show the Wizards.
SimpleDesk1.tiff
SimpleDesk1.tiff (672.2 KiB) Viewed 8440 times
SimpleDesk2.tiff
SimpleDesk2.tiff (659.14 KiB) Viewed 8440 times
User avatar
mcallegari
Posts: 4446
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Please use PNG images, not TIFF
hkbeat
Posts: 2
Joined: Thu Dec 29, 2016 3:03 pm
Real Name: Ken Davey

Ah, ok.

In fact i found the solution while looking through 'Function Manager' issues, and have solved it. The channels were all marked as 'noting' in the fixture definition.

Thanks for a great piece of software!
Post Reply