QLC+ 4.11.1 RGB Matrix only working with one Universe?

The issues found when using the Function Manager panel
Post Reply
chk
Posts: 2
Joined: Mon Oct 30, 2017 10:48 am
Real Name: Chris

In one group i have two identical RGB devices with 59 RGB heads each. One is connected to Universe 1 the other to Universe 3 via two artNet channels.

If i use this group in a RGB matrix, only one device is showing the RGB effects (the one connected to Universe 1). The second device is ignored.

With Scenes or in the simple Desk both Devices are operating as expected.

I also tried other combinations (i have three Universe 1,3,4 running) but looks like only one Universe is used in the RGB matrix....
almarques
Posts: 23
Joined: Wed Mar 23, 2016 2:07 pm
Real Name: Alex Marques

The same thing happens to me
---
Alex Marques
Elton Som e Eventos
www.eltonsom.com.br
User avatar
mcallegari
Posts: 4462
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Not reproduced with universe 1 and 2. See attached.
I will try uni 1+3 later.

Is there any particular reason you're not using universe 2 ?
Attachments
rgbMatrix2Universes.qxw
(11.12 KiB) Downloaded 84 times
User avatar
mcallegari
Posts: 4462
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Alright, tested 1+3 as well and no issue found.
Since I don't have the physical devices, I just checked the ArtNet packets with wireshark and they look correct to me.
Attachments
rgbMatrix2Universes(1+3).qxw
(11.12 KiB) Downloaded 86 times
Post Reply