Function to Sequence error

The issues found when using the Function Manager panel
Post Reply
yokosuna
Posts: 97
Joined: Tue Mar 22, 2016 9:07 am
Real Name:

Function to Sequence error

Post by yokosuna » Wed Aug 16, 2017 1:49 pm

Hi *

Just to notify: QLC+_4.11.1.89
Make a new project, add 4 simple dimmers to an RG Matrix, make a function, say fill,
convert the function to a sequence.
You will notice that:
a) the fixture will not be listed in the original order (i.e. 1, 2, 3, 4)
b) the values in the fixtures will have irritating values.

Thx.

User avatar
mcallegari
Posts: 1932
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Re: Function to Sequence error

Post by mcallegari » Wed Aug 16, 2017 2:06 pm

4.11.1.89 is from an experimental branch.
Does it work on 4.11.1.90 or is the issue still present ?

yokosuna
Posts: 97
Joined: Tue Mar 22, 2016 9:07 am
Real Name:

Re: Function to Sequence error

Post by yokosuna » Wed Aug 16, 2017 3:10 pm

Still there ...

... and in addition, the software creates a scene and names it after the matrix group.
If I delete the scene and switch over to the function editor, qlc will crash.

It´s also true for 4.11.0 with one difference: the order of the fixtures seems
not random but reversed.

And I noticed to when I run the matrix function with 76 as dmx value, the
created sequence will use 255 as dimmer values ...

HTH, Yoko

User avatar
mcallegari
Posts: 1932
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Re: Function to Sequence error

Post by mcallegari » Wed Aug 16, 2017 4:29 pm

I fixed it on GIT.
Please give version 4.11.1.100 a go

Post Reply