Page 1 of 1

Function to Sequence error

Posted: Wed Aug 16, 2017 1:49 pm
by yokosuna
Hi *

Just to notify: QLC+_4.11.1.89
Make a new project, add 4 simple dimmers to an RG Matrix, make a function, say fill,
convert the function to a sequence.
You will notice that:
a) the fixture will not be listed in the original order (i.e. 1, 2, 3, 4)
b) the values in the fixtures will have irritating values.

Thx.

Re: Function to Sequence error

Posted: Wed Aug 16, 2017 2:06 pm
by mcallegari
4.11.1.89 is from an experimental branch.
Does it work on 4.11.1.90 or is the issue still present ?

Re: Function to Sequence error

Posted: Wed Aug 16, 2017 3:10 pm
by yokosuna
Still there ...

... and in addition, the software creates a scene and names it after the matrix group.
If I delete the scene and switch over to the function editor, qlc will crash.

It´s also true for 4.11.0 with one difference: the order of the fixtures seems
not random but reversed.

And I noticed to when I run the matrix function with 76 as dmx value, the
created sequence will use 255 as dimmer values ...

HTH, Yoko

Re: Function to Sequence error

Posted: Wed Aug 16, 2017 4:29 pm
by mcallegari
I fixed it on GIT.
Please give version 4.11.1.100 a go