EFX not working in 4.10.5b

The issues found when using the Function Manager panel
Post Reply
Bennosch
Posts: 7
Joined: Sun Jan 08, 2017 12:50 pm
Location: Boostedt
Real Name:

Hello,

I use EFX functions for my LightmaXX Easy Wash QUAD LED (self-made fixture). They have been working well with 4.10.4 and 4.10.3 (not tested older releases), but now with 4.10.5b they do not move anymore. All movements and other functions aside the EFX functions are still working properly with the moving heads, that's why I think the fixture must be ok. I have tried to create new EFX functions already and that does not work either.

Any idea?

Thanks and best regards
Ben
User avatar
mcallegari
Posts: 4462
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Please post your custom fixture, your workspace and the steps to reproduce the issue you're seeing.

Saying "it doesn't work" doesn't help much
Bennosch
Posts: 7
Joined: Sun Jan 08, 2017 12:50 pm
Location: Boostedt
Real Name:

Here you go, thanks
Attachments
Amplifiers DH.qxw
(295.94 KiB) Downloaded 65 times
LightmaXX-Easy-Wash-QUAD-LED-V.2.0.qxf
(4.73 KiB) Downloaded 68 times
Bennosch
Posts: 7
Joined: Sun Jan 08, 2017 12:50 pm
Location: Boostedt
Real Name:

Ah and "by the way": I use Windows 10 with the Enttec Open DMX USB Interface.
User avatar
mcallegari
Posts: 4462
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

As I suspected, your fixture is messed up.
Check it with the online fixture validator: http://www.qlcplus.org/fixture_validator.php
There are 8 errors.

Previous QLC+ versions allowed a bad usage of Pan/Tilt fine. 4.10.5b doesn't allow it anymore. The definition must be correct.

P.S. "Ran/Tilt Speed"...really ? "Movment" ?
Bennosch
Posts: 7
Joined: Sun Jan 08, 2017 12:50 pm
Location: Boostedt
Real Name:

Yes there are some typos, thanks for reminding me. The fixture validates now and I will try again later when I am in the studio.

The online validator is really helpful, I was not aware of it.

Thank you so much!
Bennosch
Posts: 7
Joined: Sun Jan 08, 2017 12:50 pm
Location: Boostedt
Real Name:

Just to let you know: It is working now in 4.10.5b!

Thanks again and best regards
Ben
Post Reply