Modal Select of Frame On/Off

Request a feature that you would like to see in QLC+.
Explain in details why you would need it and which is your usage case.
Post Reply
benste
Posts: 37
Joined: Mon Dec 12, 2016 6:36 pm
Real Name:

Modal Select of Frame On/Off

Post by benste » Tue Dec 20, 2016 9:41 am

Hello all following from
viewtopic.php?f=18&t=9971&p=45858#p45858
and
viewtopic.php?f=18&t=10631
i would like to suggest to set the state of frame on/off other than only triggering the change between the states
this would allow to use the loopback button to enable or disable the frames in a modal exclusive way.

use case - see file attached, i have only 8 physical faders which based on which button was pressed should move the faders in one of the 5 frames.
At this stage i use the buttons labeled F1 -F5 to disable / enable the individual frames.
I wanted to do something similar to viewtopic.php?f=18&t=9971&p=45858#p45858 but the workaround with the pages doesn't work here because i can not be sure that the user didn't switch the enabled state manually.
Attachments
QLight_BadHomburg_multiInput_desk2_workInProgress.qxw
(248.88 KiB) Downloaded 16 times

Post Reply