Page 1 of 4

Re: QLC+ TEST versions

Posted: Tue Jan 17, 2017 4:28 pm
by gmint
janosvitok wrote:
gmint wrote:Crashes for me on launch under OS X 10.12.2 :( FWIW, I believe that 4.10.5(all versions) exhibited the same behavior. 4.10.4 works.
The crash is during initialization of OLA plugin. I suppose ola plugin version does not match the actual ola version. Either remove ola plugin or upgrade ola. Or something. :)
Well what do you know, that was it ;) I don't even recall installing OLA, but I must have. Luckily even if I'm not smart enough to figure out what's causing the crash, at least I can figure out where OLA was installed from the crash log... Thanks @Janosvitok

Re: QLC+ TEST versions

Posted: Tue Jan 17, 2017 6:41 pm
by janosvitok
Great! :)

Re: QLC+ TEST versions

Posted: Wed Jan 25, 2017 9:51 pm
by MayanBlue
Thank you for the latest test version for theatre using.

The problem, i've reported here, is solved.

Great work!

Re: QLC+ TEST versions

Posted: Thu Feb 02, 2017 2:22 pm
by Mihai Andrei
If you can integrate the function
"Virtual Console / Slider: improved level monitoring with The Possibility to act like a Simple Desk slider (see documentation)"
  Also in the XY pad for moving heads and perfect!
if you use it without the virtual console screen holds up ... do not crash .. obvious to use it you have to have an external controller .. as I tried it ..

Re: QLC+ TEST versions

Posted: Mon Feb 06, 2017 4:11 pm
by caxpern
Thanks a lot Massimo!
Only thing i noticed is that the slider monitor isn't showing the actual fade out time, only the fade in from the next que! I got really confused before realizing!

Again, thanks for all the work you put into this!

Re: QLC+ TEST versions

Posted: Tue Feb 07, 2017 11:24 am
by omar86
Is there any possibility to see a full 16bit control in test version? There are a lot of fixture with fine DIMMER, fine zoom, fine RGB and fine pan and tilt.. it would be a great addon..
Thank you for your work

Re: QLC+ TEST versions

Posted: Thu Feb 09, 2017 8:19 am
by debbio
+1
16 bit support would be great!!!

Re: QLC+ TEST versions

Posted: Wed Feb 22, 2017 3:28 pm
by didou64
Hi Massimo,
I don't know if this has already escalated.
I just compiled latest git version and I found a little bug when modifying color in a scene.

When max value (255) is set for blue channel (0xFF) for instance, when you want to modify color by clicking on relevant icon, values are not correct: 254 instead of 255, 0xFE instead of 0xFF. See screenshot attached.

Works fine when initial value is not equal to 255...

Hope this helps.

Re: QLC+ TEST versions

Posted: Wed Feb 22, 2017 8:56 pm
by janosvitok
ColorPicker problem seems like a QT Bug e.g. https://forum.qt.io/topic/49790/qcolord ... d-qt-red/6

QLC+ TEST versions: fully functional!!

Posted: Mon Apr 10, 2017 1:07 am
by Mihai Andrei
used for several hours at my own risk .. I had no crash! Institute to perfection for 10 consecutive hours ... with normal modifcation the program during the event.
My configuration:
Os: OSX 10.11.6 ElCapitan
SW: QLC + _4.10.6-TEST-20170326.dmg
And signaling over E1:31 to OLA on Raspberry Pi 3 with USB interface Enttec Pro

Re: QLC+ TEST versions

Posted: Sun Apr 23, 2017 3:28 am
by lorenzoandreani
QLC+_4.11.0.1 (22/04/2017) on Windows 10 crash when open a .qxw workspace.

I think the problem is due to the new sequence management because if you convert the file to the online converter, the problem does not occur.

Re: QLC+ TEST versions

Posted: Sun Apr 23, 2017 7:46 am
by mcallegari
lorenzoandreani wrote: Sun Apr 23, 2017 3:28 am QLC+_4.11.0.1 (22/04/2017) on Windows 10 crash when open a .qxw workspace.

I think the problem is due to the new sequence management because if you convert the file to the online converter, the problem does not occur.
Indeed, after a recent rework on Sequences, backward compatibility is interrupted.
However, QLC+ should not crash and should show an error message saying that projects using sequences must be converted to the new format with the migration tools.

Anyway, I've fixed the crash on GIT, thanks for reporting.

Re: QLC+ TEST versions

Posted: Mon Jul 10, 2017 12:27 am
by nedmech
Finally got around to trying out 4.11.0 on my oldest production machine only to encounter the following error:

"Procedure entry point CancelIoEx could not be located in the dynamic link library KERNEL32.dll"

This particular computer is still running Windows XP (for various reasons). I'm assuming that compatibility with Windows XP has now been broken by the change to QT 5.9? The QT support page only lists Windows support back to Win7 (http://doc.qt.io/qt-5/supported-platforms.html). Can you confirm if that's really the case, or is this some other glitch I've run into?

Re: QLC+ TEST versions

Posted: Mon Jul 10, 2017 7:25 am
by janosvitok

Re: QLC+ TEST versions

Posted: Mon Jul 10, 2017 12:05 pm
by mcallegari
At this point, I think bundling Qt 5.9 was a mistake.
There's been reports of issues also with older macOS versions.
Most likely 4.11.1 will bundle Qt 5.6.2 again but guys, I cannot support dinosaurs forever.
The world is moving on:
- Microsoft even stopped XP support
- Apple is constantly polling you to update to the very latest macOS version...until your Mac (or iPhone/iPad) will need to be thrown in the trash can

I don't understand why QLC+ can't adapt to these tendencies.

I really hope QLC+ 5 will draw a line on this. In any case Qt 5.9 will be the minimum version required for technical reasons.

Re: QLC+ TEST versions

Posted: Tue Jul 11, 2017 3:14 am
by nedmech
Thanks for confirming this, Massimo & Jano. I've got no problem with QLC+ moving forward and dropping support for XP. I plan to upgrade that machine to Windows 10 soon. I'm mostly waiting on my IT guy to actually purchase what we need to upgrade it.

Re: QLC+ TEST versions

Posted: Mon Jul 17, 2017 6:38 pm
by mcallegari
I have reverted to Qt 5.6.2. Now test builds should work again on XP and Vista too.
I'm wondering though if in keeping Qt back we're missing something valuable, like for example multimedia improvements.
Apparently not (the damn issue of 0x0 videos has not been fixed (in years) yet) but still, the doubt remains.

Re: QLC+ TEST versions

Posted: Thu Aug 31, 2017 5:04 am
by soundupinc
Hello
thx for great software)
yesterday we hava test QLC+_4.11.1.90.exe
we use QLC with Akai APC Mini in 4.11 we have seen that Slider VALUE RANGE, don`t see limits (low limit and hight limit) when we use Slider on AKAI. all ok with this is in 4.10.5

Re: QLC+ TEST versions

Posted: Fri Sep 01, 2017 8:57 am
by dino.loss
hi,
You're right, same problem!
I did the test with QLC+ 4.11.1.154 with APC Mini and Windows 7
On the attached workspace the limit value is set between 8 and 134 and the monitor can vary from 0 to 255

Re: QLC+ TEST versions

Posted: Sat Sep 02, 2017 10:02 am
by mcallegari
Should be fixed now, please test version 4.11.1.162.
Thanks for reporting