Page 2 of 4

Re: QLC+ TEST versions

Posted: Tue Jan 17, 2017 4:28 pm
by gmint
janosvitok wrote:
gmint wrote:Crashes for me on launch under OS X 10.12.2 :( FWIW, I believe that 4.10.5(all versions) exhibited the same behavior. 4.10.4 works.
The crash is during initialization of OLA plugin. I suppose ola plugin version does not match the actual ola version. Either remove ola plugin or upgrade ola. Or something. :)
Well what do you know, that was it ;) I don't even recall installing OLA, but I must have. Luckily even if I'm not smart enough to figure out what's causing the crash, at least I can figure out where OLA was installed from the crash log... Thanks @Janosvitok

Re: QLC+ TEST versions

Posted: Tue Jan 17, 2017 6:41 pm
by janosvitok
Great! :)

Re: QLC+ TEST versions

Posted: Wed Jan 25, 2017 9:51 pm
by MayanBlue
Thank you for the latest test version for theatre using.

The problem, i've reported here, is solved.

Great work!

Re: QLC+ TEST versions

Posted: Thu Feb 02, 2017 2:22 pm
by Mihai Andrei
If you can integrate the function
"Virtual Console / Slider: improved level monitoring with The Possibility to act like a Simple Desk slider (see documentation)"
  Also in the XY pad for moving heads and perfect!
if you use it without the virtual console screen holds up ... do not crash .. obvious to use it you have to have an external controller .. as I tried it ..

Re: QLC+ TEST versions

Posted: Mon Feb 06, 2017 4:11 pm
by caxpern
Thanks a lot Massimo!
Only thing i noticed is that the slider monitor isn't showing the actual fade out time, only the fade in from the next que! I got really confused before realizing!

Again, thanks for all the work you put into this!

Re: QLC+ TEST versions

Posted: Tue Feb 07, 2017 11:24 am
by omar86
Is there any possibility to see a full 16bit control in test version? There are a lot of fixture with fine DIMMER, fine zoom, fine RGB and fine pan and tilt.. it would be a great addon..
Thank you for your work

Re: QLC+ TEST versions

Posted: Thu Feb 09, 2017 8:19 am
by debbio
+1
16 bit support would be great!!!

Re: QLC+ TEST versions

Posted: Wed Feb 22, 2017 3:28 pm
by didou64
Hi Massimo,
I don't know if this has already escalated.
I just compiled latest git version and I found a little bug when modifying color in a scene.

When max value (255) is set for blue channel (0xFF) for instance, when you want to modify color by clicking on relevant icon, values are not correct: 254 instead of 255, 0xFE instead of 0xFF. See screenshot attached.

Works fine when initial value is not equal to 255...

Hope this helps.

Re: QLC+ TEST versions

Posted: Wed Feb 22, 2017 8:56 pm
by janosvitok
ColorPicker problem seems like a QT Bug e.g. https://forum.qt.io/topic/49790/qcolord ... d-qt-red/6

QLC+ TEST versions: fully functional!!

Posted: Mon Apr 10, 2017 1:07 am
by Mihai Andrei
used for several hours at my own risk .. I had no crash! Institute to perfection for 10 consecutive hours ... with normal modifcation the program during the event.
My configuration:
Os: OSX 10.11.6 ElCapitan
SW: QLC + _4.10.6-TEST-20170326.dmg
And signaling over E1:31 to OLA on Raspberry Pi 3 with USB interface Enttec Pro