QLC+ TEST versions

gmint
Posts: 82
Joined: Wed Apr 15, 2015 8:04 pm
Real Name: George Qualley IV

Re: QLC+ TEST versions

Post by gmint » Tue Jan 17, 2017 4:28 pm

janosvitok wrote:
gmint wrote:Crashes for me on launch under OS X 10.12.2 :( FWIW, I believe that 4.10.5(all versions) exhibited the same behavior. 4.10.4 works.
The crash is during initialization of OLA plugin. I suppose ola plugin version does not match the actual ola version. Either remove ola plugin or upgrade ola. Or something. :)
Well what do you know, that was it ;) I don't even recall installing OLA, but I must have. Luckily even if I'm not smart enough to figure out what's causing the crash, at least I can figure out where OLA was installed from the crash log... Thanks @Janosvitok

janosvitok
Posts: 695
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:

Re: QLC+ TEST versions

Post by janosvitok » Tue Jan 17, 2017 6:41 pm

Great! :)

MayanBlue
Posts: 9
Joined: Thu Nov 17, 2016 10:37 pm
Real Name: Michael

Re: QLC+ TEST versions

Post by MayanBlue » Wed Jan 25, 2017 9:51 pm

Thank you for the latest test version for theatre using.

The problem, i've reported here, is solved.

Great work!

Mihai Andrei
Posts: 72
Joined: Sun Sep 27, 2015 10:58 am
Location: Italy-Arezzo
Real Name: Mihai Andrei
Contact:

Re: QLC+ TEST versions

Post by Mihai Andrei » Thu Feb 02, 2017 2:22 pm

If you can integrate the function
"Virtual Console / Slider: improved level monitoring with The Possibility to act like a Simple Desk slider (see documentation)"
  Also in the XY pad for moving heads and perfect!
if you use it without the virtual console screen holds up ... do not crash .. obvious to use it you have to have an external controller .. as I tried it ..

caxpern
Posts: 3
Joined: Thu Feb 18, 2016 8:56 am
Real Name: Casper Wijlhuizen

Re: QLC+ TEST versions

Post by caxpern » Mon Feb 06, 2017 4:11 pm

Thanks a lot Massimo!
Only thing i noticed is that the slider monitor isn't showing the actual fade out time, only the fade in from the next que! I got really confused before realizing!

Again, thanks for all the work you put into this!

omar86
Posts: 10
Joined: Sat Nov 05, 2016 6:09 pm
Real Name:

Re: QLC+ TEST versions

Post by omar86 » Tue Feb 07, 2017 11:24 am

Is there any possibility to see a full 16bit control in test version? There are a lot of fixture with fine DIMMER, fine zoom, fine RGB and fine pan and tilt.. it would be a great addon..
Thank you for your work

debbio
Posts: 23
Joined: Wed May 06, 2015 10:18 am
Real Name:

Re: QLC+ TEST versions

Post by debbio » Thu Feb 09, 2017 8:19 am

+1
16 bit support would be great!!!

didou64
Posts: 25
Joined: Sat Oct 10, 2015 10:43 pm
Location: France
Real Name: Patrick Yoyotte
Contact:

Re: QLC+ TEST versions

Post by didou64 » Wed Feb 22, 2017 3:28 pm

Hi Massimo,
I don't know if this has already escalated.
I just compiled latest git version and I found a little bug when modifying color in a scene.

When max value (255) is set for blue channel (0xFF) for instance, when you want to modify color by clicking on relevant icon, values are not correct: 254 instead of 255, 0xFE instead of 0xFF. See screenshot attached.

Works fine when initial value is not equal to 255...

Hope this helps.
Attachments
QLC_4.10.6GIT_Issue with color.png
Didou
OS: Ubuntu 14.04 Mate Edition
QLC+ Version: 4.10.4

janosvitok
Posts: 695
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:

Re: QLC+ TEST versions

Post by janosvitok » Wed Feb 22, 2017 8:56 pm

ColorPicker problem seems like a QT Bug e.g. https://forum.qt.io/topic/49790/qcolord ... d-qt-red/6

Mihai Andrei
Posts: 72
Joined: Sun Sep 27, 2015 10:58 am
Location: Italy-Arezzo
Real Name: Mihai Andrei
Contact:

QLC+ TEST versions: fully functional!!

Post by Mihai Andrei » Mon Apr 10, 2017 1:07 am

used for several hours at my own risk .. I had no crash! Institute to perfection for 10 consecutive hours ... with normal modifcation the program during the event.
My configuration:
Os: OSX 10.11.6 ElCapitan
SW: QLC + _4.10.6-TEST-20170326.dmg
And signaling over E1:31 to OLA on Raspberry Pi 3 with USB interface Enttec Pro

Post Reply